Stihl BR 800 C User Manual

8.2 At temperatures above +20°C
►
Move the shutter (4) to the left to position s
(summer operation).
NOTICE
If the shutter (4) is not moved to position s at
temperatures above 20°C, there is a risk of
engine running problems caused by overheating.
9 Information Before You
Start
NOTICE
With the engine stopped, check the following
parts before starting and clean if necessary:
–
Base plate
–
Intake screen between backplate and engine
9.1 Positions of Setting Lever
2
1
0416BA010 KN
1 Setting lever
2 Throttle trigger
Position “F”
Engine runs or is ready to start. Throttle trig‐
ger (2) can be moved to any position.
Position “†”
Ignition is interrupted, engine stops. The setting
lever (1) is not locked in this position. It springs
back to position “F”. The ignition is switched on
again.
Fixed throttle
0416BA013 KN
2
1
The throttle trigger (2) can be locked in any posi‐
tion.
To disengage the lock:
►
Return the setting lever (1) to position “F”.
10 Starting / Stopping the
Engine
10.1 Starting the Engine
► Observe safety precautions.
NOTICE
Start your machine on a clean, dust-free surface
only to ensure that no dust is sucked in.
0416BA011 KN
►
Move the setting lever to F
0000-GXX-5390-A0
► Press the fuel pump bulb at least 6 times –
even if the bulb is already filled with fuel.
English 9 Information Before You Start
12 0458-490-8321-B

Stihl BR 800 C Specifications

General

Brand	Stihl
Model	BR 800 C
Category	Blower
Language	English