Stihl FC 56 C User Manual

FC 56 C
English
27
Do not attempt to straighten or weld a
bent or cracked blade – it may break –
it must be replaced – see "Mounting the
Cutting Blade".
STIHL recommends you use only
original STIHL cutting blades – see
"Special Accessories".
Do not resharpen the blade.
N Replace the blade (1) if its
length (A) is no longer sufficient to
maintain the necessary ground
clearance (B) and obtain the
required depth of cut (C).
Checking out-of-balance
To avoid out-of-balance:
N Have your dealer check the blade
for out-of-balance on a STIHL
balancer (special accessory) –
STIHL recommends an authorized
STIHL servicing dealer. If blade is
out-of-balance, fit a new one – see
"Replacing the Edger Blade".
Spark Arresting Screen in Muffler
Spark arresting screen in muffler (not all
markets)
N If the engine is down on power,
check the spark arresting screen in
the muffler.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
Replacing the Cutting
Blade
241BA019 KN
C
A
B
1
Inspections and
Maintenance by Dealer

Stihl FC 56 C Specifications

General

Brand	Stihl
Model	FC 56 C
Category	Lawn Mower
Language	English