19.2 Sound Values and Vibration
Values
The K-value for sound pressure levels is 2 dB(A).
K-value for sound power levels is 2 dB(A). The
K-value for vibration level is 2 m/s².
Using with a mowing head
–
Sound pressure level L
pA
measured according
to ISO 22868: 99 dB(A).
–
Sound power level L
wA
measured according to
ISO 22868: 111 dB(A).
–
Vibration level a
hv
measured according to
ISO 22867:
–
Control handle: 4.9 m/s².
–
Left handle: 4.9 m/s².
Using with a metal cutting attachment
–
Sound pressure level L
pA
measured according
to ISO 22868: 99 dB(A).
–
Sound power level L
wA
measured according to
ISO 22868: 111 dB(A).
–
Vibration level a
hv
measured according to
ISO 22867:
–
Control handle: 2.1 m/s².
–
Left handle: 2.2 m/s².
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
19.3 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19.4 Exhaust Emissions
The CO
2
value measured in the EU type approval
procedure is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
20 Combinations of Cutting Attachments and Deflectors
20.1 Combinations of Cutting Attachments and Deflectors
Cutting attachment Deflector Barrier bar
–
AutoCut C 26-2 mow‐
ing head
–
AutoCut 36-2 mowing
head
–
DuroCut 20-2 mowing
head
–
SuperCut mowing
head 20-2
–
Universal deflector with skirt and line limiting blade
–
optional
–
Grass cutting blade
230-2
–
Grass cutting blade
230-4
–
Grass cutting blade
230-8
–
Grass cutting blade
260-2
–
Universal deflector without skirt
–
required
–
Brush knife 250-3
–
Universal deflector without skirt
–
required
English 20 Combinations of Cutting Attachments and Deflectors
22 0458-527-0121-B
To Next Page
Loading...
Need help?
General
