FS 160, FS 220, FS 280, FS 290
English
80
N Opening the filler cap
N Filling up with fuel
WARNING
After fueling, tighten down the filler cap
as securely as possible by hand.
Changing the Fuel Pickup Body
Change the fuel pickup body every year:
N Drain the fuel tank.
N Use a hook to pull the fuel pickup
body out of the tank and take it off
the hose.
N Push the new pickup body into the
hose.
N Place the pickup body in the tank.
Full Harness
N Put on the full harness (1).
N Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
FS 160
N Attach the carabiner (2) to the
carrying ring (3) on the drive tube.
N Loosen the screw (4).
N Move carrying ring as required on
the drive tube – see "Balancing the
Machine".
N Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
N Tighten down the screw (4) firmly.
Fitting the Full Harness
To Next Page
Loading...
Need help?
General
