FS 311
English
19
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
To reduce the risk of injury, only the
cutting attachments and deflectors or
limit stops shown in each row of the
table may be used together. No other
combinations are permitted.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 40-2
2 STIHL AutoCut 40-2
3 STIHL AutoCut 46-2
4 STIHL TrimCut 40-2
5 STIHL TrimCut 41-2
6 STIHL DuroCut 40-4
7 STIHL PolyCut 40-3
Metal cutting attachments
8 Grass cutting blade 230-4
(230 mm dia.)
9 Grass cutting blade 255-8
(255 mm dia.)
10 Brush knife 300-3
(300 mm dia.)
11 Scratcher tooth circular saw blade
200
(200 mm dia.)
12 Chisel tooth circular saw blade 200-
22 (4119), chisel tooth circular saw
blade 200-22 HP (4000)
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stop
13 Deflector for mowing heads
14 Deflector for grass cutting blades
and brush knives
15 Limit stop for circular saw blades
Harness
16 Full harness must be used
17 Full "deluxe" harness must be used
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of serious personal injury
from thrown objects and contact with the
cutting attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of serious personal injury
from loss of control and contact with the
cutting attachment.
To reduce the risk of serious personal
injury from contact with the cutting
attachment, use grass cutting metal
blades and brush knives on this unit only
if equipped with a bike handle or a loop
handle with barrier bar. Use circular saw
blades on this unit only if equipped with
a bike handle.
Do not use rigid polymer blades on this
unit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
