When working at temperatures below -10°C or in
powder or drifting snow, a cover plate must also
be fitted to the engine housing and an air filter
with plastic webbing. The accessories are availa‐
ble from a STIHL servicing dealer.
11.2 Summer Operation
The shutter must be set to summer mode when
working at temperatures above +10°C.
► Shut off the engine.
► Take out the screw (1).
► Pull out the shutter (2).
► Hold the shutter (2) so the sun points to the
mark (3).
► Fit the shutter.
► Fit the screw (1).
11.3 Holding and Controlling the
Brushcutter
► Hook the carrying strip (2) onto the carabi‐
ner (1).
► Hold the brushcutter firmly with your right hand
on the control handle – wrap your thumb
around the handle.
► Hold the brushcutter with your the left hand on
the left grip in such a way that your thumb
encloses the handle.
11.4 Mowing
The cutting height is determined by the distance
of the cutting attachment from the ground.
Mowing with a mowing head (A)
► Swing the brushcutter steadily back and forth
in an arc.
► Move forward slowly in a controlled manner.
Mowing with a grass cutting blade or brush
knife (B)
► Mow with the left-hand side on the metal cut‐
ting attachment.
► Move forward slowly in a controlled manner.
11.5 Thinning with a brush knife or
shredder blade
► Dip the metal cutting attachment into the
thicket from above.
► Do not lift metal cutting tool above waist
height.
11.6 Saws with a circular saw blade
11 Operating the Trimmer English
0458-841-0101-A 17