1HL
English / USA
BA_SE_086_003_01_06.fmPrinted on chlorine-free paper.
Printing inks contain vegetable oils; paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2007
0458 401 8621 A. M2. K7. PM. Printed in USA
STIHl
Contents
Power Tool Attachments ................... 2
Guide to Using this Manual .............. 2
Safety Precautions and
Working Techniques ......................... 3
Using the Hedge Cutter .................. 10
Approved Basic Power Tools .......... 12
Mounting the Attachment ................ 12
Fitting the Harness ......................... 14
Adjusting Cutter Bar ....................... 14
Starting / Stopping the Engine ........ 16
Lubricating the Gearbox ................. 16
Storing the Machine ........................ 17
Sharpening the Cutting Blades ....... 18
Main Parts ...................................... 19
Specifications ................................. 20
Special Accessories ....................... 20
Maintenance and Repairs ............... 20
Allow only persons who understand this
manual to operate your hedge cutter.
To receive maximum performance and
satisfaction from your STIHL hedge
cutter, it is important that you read and
understand the maintenance and safety
precautions, starting on page 3, before
using your hedge cutter.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
!Warning!
Because a hedge cutter is a high-speed
cutting tool some special safety
precautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the
appearance of your hedge cutter differs
from those described in this manual,
please contact your STIHL dealer for
information and assistance.
To Next Page
Loading...
Need help?
General
