Stihl MS 181 C User Manual

MS 171, MS 181, MS 181 C, MS 211, MS 211 C
English
32
Preparations
N Before fueling, clean the filler cap
and the area around it to ensure that
no dirt falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
N Position the machine so that the
filler cap is facing up.
WARNING
In order to reduce the risk of fire and
other personal injury from escaping gas
vapor and fumes, remove the fuel filler
cap carefully so as to allow any pressure
build-up in the tank to release slowly
Filler cap markings
Filler caps and fuel tanks may be
marked in different ways.
Depending on the version, your unit may
be equipped with a filler cap and fuel
tank with or without symbols.
Filler cap without symbols
Opening
N Raise handle.
N Twist filler cap counterclockwise
(approx. 1/4 turn).
N Remove the filler cap.
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank – leave
approx. 1/2" (13 mm) air space.
Closing
Handle is in an upright position:
N Insert the cap – positioning marks
on the cap and the fuel tank opening
must line up.
N The cap should drop fully into the
opening in this position.
Fueling
001BA229 KN
Left: Filler cap without symbols.
Right: Filler cap with markings and
symbols on cap and tank.
001BA240 KN
001BA218 KN
001BA219 KN
001BA224 KN
001BA220 KN

Stihl MS 181 C Specifications

General

Brand	Stihl
Model	MS 181 C
Category	Chainsaw
Language	English