Stihl MS 181 C User Manual

MS 171, MS 181, MS 181 C, MS 211, MS 211 C
English
59
this model chain saw (see the chapter
on "Safety Precautions and Working
Techniques"):
Rollomatic E guide bars – MS 171,
MS 171 C, MS 181, MS 181 C
Actual cutting length will be less than
listed bar length.
Rollomatic E guide bars – MS 211,
MS 211 C
Actual cutting length will be less than
listed bar length.
Rollomatic E Light guide bars – MS 211,
MS 211 C
Actual cutting length will be less than
listed bar length.
Saw chain 3/8" P – MS 171, MS 171 C,
MS 181, MS 181 C
Saw chain 3/8" P – MS 211, MS 211 C
Chain sprocket – MS 171, MS 171 C,
MS 181, MS 181 C
Chain sprocket – MS 211, MS 211 C
To comply with the 45 degree computed
kickback angle requirement of Section
5.11 of ANSI/OPEI B175.1-2012, use
replacement saw chains listed above or
elsewhere by STIHL as conforming with
that requirement when used on this
model chain saw or use saw chains
classified as "low kickback" in
accordance with
ANSI/OPEI B175.1-2012.
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 30, 35, 40 cm (12, 14,
16 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm (0.043 in)
Sprocket nose: 7-tooth
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 30, 35, 40 cm (12, 14,
16 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm (0.050 in)
Sprocket nose: 9-tooth
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 35 cm (14 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm (0.050 in)
Sprocket nose: 9-tooth
Low kickback STIHL saw chain (with
green label)
Picco Micro Mini 3 (61 PMM3)
Type 3610
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.1 mm (0.043 in)
Low kickback STIHL saw chain (with
green label)
Picco Micro 3 (63 PM3) Type 3636
Picco Super 3 (63 PS3) Type 3616
Picco Duro 3 (63 PD3) Type 3612
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.3 mm (0.050 in)
7-tooth for 3/8" P(rim sprocket, spur
sprocket)
7-tooth for 3/8" P (rim sprocket, spur
sprocket)
6-tooth for 3/8" P (rim sprocket, spur
sprocket)

Stihl MS 181 C Specifications

General

Brand	Stihl
Model	MS 181 C
Category	Chainsaw
Language	English