Stihl MS 194 C User Manual

MS 194 C
English
28
Releasing the chain brake
N Pull the hand guard (4) toward the
handle until there is an audible click
– the chain is disengaged.
Removing the chain sprocket cover
N Unscrew the nut (5) and remove the
cover (6).
Mounting the guide bar
N Turn the screw (7)
counterclockwise until the tensioner
slide (8) butts against the left end of
the housing slot.
N Fit the guide bar over the stud (9)
and engage the peg of the tensioner
slide in the hole (10).
Fitting the chain
WARNING
Wear work gloves to protect your hands
from the sharp cutters.
N Fit chain around the sprocket (11)
and over the guide bar – the cutting
edges on top of the bar must point to
the bar nose.
N Turn the tensioning screw (7)
clockwise until there is very little
chain sag on the underside of the
bar – and the drive link tangs are
engaged in the bar groove.
Mounting the Bar and Chain
151BA002 KN
4
5
6
142BA058 KN
142BA059 KN
7
8
142BA060 KN
10
9
11
142BA061 KN
7
142BA062 KN

Stihl MS 194 C Specifications

General

Brand	Stihl
Model	MS 194 C
Category	Saw
Language	English