Stihl MS 461 R User Manual

MS 461 R
English
5
Fitting the holder
N Coat inside of hole (a) with STIHL
OH 723 press fluid or washing-up
liquid.
N Push the holder (2) onto the wrap-
around handlebar so that the
recess (b) is as shown in the
illustration.
N Position the holder (2) with the
recess (b) as shown in the
illustration.
Assembling wrap-around handlebar
N Push bracket (3) onto center
strut (4) and secure to end (5) of
handlebar with M5x20 screw (6)
and washer (7).
Mounting wrap-around handlebar
N Slip the handlebar (b) over the saw
from the rear and bring it into
position.
N Fit the P6x32.5 screws (2).
N Insert and tighten down the existing
P6x19 screws (3).
N Fit the combination wrench in the
holder.
179BA039 KN
a
2
b
4
5
3
147BA006 KN
6
7

Stihl MS 461 R Specifications

General

Brand	Stihl
Model	MS 461 R
Category	Chainsaw
Language	English