EasyManuals Logo
Home>Stihl>Chainsaw>MS 660

Stihl MS 660 User Manual

Stihl MS 660
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
60
English / USA
MS 650, MS 660
EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category:
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
Engine
STIHL single cylinder two-stroke engine
Displacement
MS 650: 5.10 cu in (83.7 cm
3
)
MS 660: 5.59 cu in (91.6 cm
3
)
Bore
MS 650: 2.05 in (52 mm)
MS 660: 2.13 in (54 mm)
Stroke
MS 650: 1.57 in (40 mm)
MS 660: 1.57 in (40 mm)
Idle speed
2,500 rpm
Ignition System
Electronic magneto ignition
Spark plug (suppressed):
Bosch WSR 6 F, NGK BPMR 7 A,
Electrode gap 0.02 in (0.5 mm)
Fuel/Oil System
Carburetor,
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity,
1.74 US pt (0,825 l)
Fuel mix,
See “Fuel”
Chain lubrication,
Fully automatic, speed-controlled oil
pump with rotary piston. Additional
manual oil flow control.
Oil tank capacity,
0.76 US pt (0.360 l)
Weight
MS 650: 16.1 lb (7.3 kg)
MS 660: 16.1 lb (7.3 kg)
MS 660 with handle
heating: 16.5 lb (7.5 kg)
Cutting Attachment
Recommended cutting attachments
for compliance with § 5.11 of ANSI
Standard B 175.1-2000
(see page 14 of this Manual):
STIHL reduced kickback bar
(with green label) for 3/8" pitch:
Rollomatic with sprocket nose
16, 18 or 20 in (40, 45 or 50 cm)
STIHL low kickback chain
1)
(with green label) for 3/8" pitch:
3/8" (9.32 mm) Rapid-Micro 2
(33 RM 2, 36 RM 2), Rapid Super C3
(33 RSC 3, 36 RSC 3)
Chain sprocket:
8-tooth for 3/8" pitch
In order to comply with the kickback
performance requirements of § 5.11
of ANSI Standard B 175.1-2000,
do not use replacement saw chain
unless it has been designated as
meeting the ANSI § 5.11 requirements
on this specific powerhead, or has been
designated as "low kickback" saw
chain
1)
in accordance with the ANSI B
175.1-2000 standard.
1)
See definition of "low kickback
chain" on page 17 of this Manual.
Specifications

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl MS 660 and is the answer not in the manual?

Stihl MS 660 Specifications

General IconGeneral
BrandStihl
ModelMS 660
CategoryChainsaw
LanguageEnglish

Related product manuals