EasyManuals Logo
Home>Stihl>Pressure Washer>RE 150

Stihl RE 150 User Manual

Stihl RE 150
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Calculating the predilution of the detergent in %
If the predilution is not indicated as a % value on
the packaging of the detergent used, it can be
determined as follows:
Ratio value
1:1 = 50 %
1:2 = 33.3 %
1:3 = 25 %
1:5 = 16.6 %
1:10 = 9 %
Example: Calculation ratio value 1:2.
A = 1
B = 2
A
x 100 = V
x 100 = 33,3%
( A + B )
1
( 1 + 2 )
0000-GXX-9861-A0
Measuring and calculating the detergent concen‐
tration.
Turn the rotary control to set the working pres‐
sure and water quantity in the + direction up to
the stop.
Turn the dosing handle for cleaning detergent
to the right as far as it will go.
Fill the detergent container with cleaning agent
up to the 0.5 liter mark.
Turn the fan jet nozzle in the direction - up to
the stop.
Switch on pressure washer.
Hold the spray gun in an empty collecting con‐
tainer.
Actuate the spray gun and fill 2 liters into the
collecting container.
Determine the consumption of detergent
„QR“ from the detergent container.
Calculation of the actual detergent concentration:
QR
Q
x V = K
0000-GXX-9862-A0
QR = Quantity of detergent used (in liters).
Q = 2 liters.
V = Pre-dilution of the cleaning agent (in %).
K = Concentration of the cleaning agent..
If the calculated concentration differs from the
desired one: Reduce dosage at the dosing
handle and repeat measurement and calcula‐
tion.
12 After Finishing Work
12.1 After finishing work
Switch off the pressure washer and pull the
mains plug out of the socket.
If the pressure washer is connected to the
water supply: Turn off water tap.
Press spray gun trigger.
The water pressure is released.
Lock spray gun trigger.
Disconnect pressure washer from the water
supply.
Remove water hose.
Remove high-pressure hose and let the
remaining water run out of the high-pressure
hose.
Remove and clean the nozzle and spray
lance.
Remove the spray gun and let the remaining
water run out of the spray gun.
Clean the pressure washer.
2
1
0000-GXX-9867-A0
Swivel lower holder (1) upwards
Coil the connecting cord (2) on the holder (1).
Secure the connecting cord (2) using the clip
on the support (1).
3
0000-GXX-9853-A0
Insert detergent container (3).
English 12 After Finishing Work
18 0458-603-0121-B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl RE 150 and is the answer not in the manual?

Stihl RE 150 Specifications

General IconGeneral
BrandStihl
ModelRE 150
CategoryPressure Washer
LanguageEnglish

Related product manuals