35
DEFRNLITESPTNOSVFIDAPLSLSKHU EN
0478 670 9907 C - EN
● Place the machine on level and firm
ground when performing all the
operations described.
● Remove the cardboard insert (1) from
the underside of the machine.
7.1 Assembling the handlebar
Installing the upper handlebar:
● Fit upper handlebar (1) onto both
parts of the lower handlebar.
● Insert flat head bolts with cable
guide (B) through the bores from the
inside to the outside and tighten with
rotary handles (C).
● Attach motorstop cable (2) to right-hand
cable guide (3) and scarifying unit
cable (4) to left-hand cable guide (5) as
shown.
Installing the cable clips:
● Install the first cable clip (D) on the
upper handlebar. Distance between the
cable clip and switch:
25 - 27 cm
● Install the second cable clip (D) on the
lower handlebar.
● Insert motorstop cable (2) into the two
cable clips as shown. Close tab (6) and
allow it to engage.
7.2 Attaching and detaching the
recoil starter rope
● Detach the spark plug socket
from the engine before attaching and
detaching the recoil starter rope –
replace afterwards if necessary.
Attaching:
● Press motorstop lever (1) to the
handlebar and hold.
● Slowly pull out recoil starter rope (2)
and hold. Release the motorstop lever.
● Attach recoil starter rope (2) in rope
guide (3).
Detaching:
● Detach recoil starter rope (2) from rope
guide (3) and slowly return.
7.3 Fuel and engine oil
Start the engine.
Stop the engine.
Scarifying unit in transport
position
Scarifying unit in operating
position
6. Standard equipment
Item Designation Qty.
A Basic unit 1
B Flat head bolt with cable
guide 2
C Rotary handle 2
D Cable clip 2
Instruction manual 1
Engine instruction manual 1
2
7. Preparing the machine for
operation
Risk of injury!
Observe the safety instructions in
the section "For your safety". (Ö 4.)
Follow the instructions in the
section "Transporting the machine"
when lifting the scarifier out of the
packaging. In particular, wear
gloves and avoid contact with the
blades. (Ö 4.4)
3
Avoid damage to the machine!
Top u p engine oi l b efore starting f or
the first time. Use a suitable filling
aid when topping up the engine oil
and when refuelling (e.g. funnel).
4
5