- 3 -
3. DISASSEMBLY AND REASSEMBLY
3-1 PREPARATIONS AND PRECAUTIONS
(1) When disassembling the engine, memorize the location of each part so that you can
reassemble the engine correctly. If necessary, attach identification tags with the required
assembly information to the parts.
(2) Store groups of parts in separate boxes. This will make reassembly easier.
(3) To prevent parts from being mislaid, keep each group provisionally assembled after
removing the parts from the engine.
(4) Handle the disassembled parts with the utmost care. Clean them with cleaning oil if
necessary.
(5) Use the correct tools in the correct way when disassembling and reassembling the engine.
3-2 SPECIAL TOOLS
Description Parts number
Flywheel puller for pulling off the flywheel
FLYWHEEL PULLER
Commercially available product
Dwyer #490-1 Wet
Wet handheld manometer
XXXXXXXX
Throttle body
Computer data cable with 9 volt battery
308802006
Diagnostic EFI Compact Disc XXXXXXXX
Desktop or laptop computer RS232 9-pin COM port on computer
To Next Page
Loading...
Need help?
General
