Suzuki DF350A Service Manual

0A-1 General Information:
General Info rmation
General Information
General Description
Symbols
CENHN1110101001
Listed in the table below are the symbols indicating instructions and other important information necessary for proper
servicing.
Please note the definition for each symbol. You will find these symbols used throughout this manual.
Refer back to this table if you are not sure of any symbol(s) meanings.
Symbol Definition
Torque control required.
Data beside it indicates specified torque.
Apply oil.
Use engine oil unless otherwise specified.
Apply molybdenum oil solution.
(Mixture of engine oil and SUZUKl MOLY PASTE in a ratio of 1 : 1)
Apply SUZUKI Outboard Motor Gear Oil.
Apply SUZUKI Super Grease A.
Apply SUZUKI Moly Paste.
99000-25140
Apply SUZUKI Water Resistant Grease.
Apply SUZUKI Bond 1207B.
Apply SUZUKI Bond 1217G.
Apply SUZUKI Silicone Seal.
Apply SUZUKI Thread Lock 1342.
Apply SUZUKI Thread Lock Super 1333B.
Use special tool.
Do not reuse.
Note on reassembly.
Use peak voltmeter Stevens CD-77.

Suzuki DF350A Specifications

General

Maximum Output	257.4kW (350PS)
Fuel Delivery System	Electronic Fuel Injection
Starting System	Electric
Steering	Remote
Gear Ratio	2.29:1
Lubrication System	Wet sump
Engine Mounting	Shear Mount
Displacement	4, 390 cm3 (267.9 cu. in.)
Bore x Stroke	98 x 97 mm
Ignition System	Fully Transistorized
Shaft Length	X: 635mm (25 in.), XX: 762mm (30 in.)
Oil Capacity	8.0 L (8.5 US qt.)
Alternator	12V 54A
Weight	330 kg (727 lbs)
Exhaust	Through Propeller Hub
Engine Type	4-stroke, DOHC, V6
Recommended Fuel	Unleaded Gasoline (87 Octane Minimum)