10-18 DR200SEK4/K5 (’04, ’05-MODELS)
TIGHTENING TORQUE
ENGINE
ITEM N·m kgf-m lb-ft
Cylinder head cover bolt 10 1.0 7.0
Camshaft sprocket bolt 11 1.1 8.0
Cylinder head nut 8 mm Diam. 27 2.7 19.5
Cylinder head nut 6 mm Diam. 10 1.0 7.0
Cylinder base nut 10 1.0 7.0
Starter clutch securing bolt 25 2.5 18.0
Cam drive chain tension adjuster bolt 7 0.7 5.0
Generator rotor nut *80 8.0 58
Crankcase bolt 11 1.1 8.0
Primary drive gear nut 50 5.0 36.0
Clutch cover bolt and generator cover bolt 10 1.0 7.0
Starter motor lead wire connecting bolt 25 0.25 1.8
Starter motor mounting bolt 10 1.0 7.0
Clutch sleeve hub nut 50 5.0 36.0
Gearshift arm stopper 19 1.9 13.5
Engine oil drain plug 28 2.8 2.0
Oil filter cap nut and oil pump filter cap bolt 7 0.7 5.0
Engine sprocket bolt 25 2.5 18.0
Engine mounting bolt (Top side) 41 4.1 29.5
Engine mounting bolt (Front side) 88 8.8 63.5
Engine mounting bolt (Rear side) 10 1.0 7.0
Engine mounting bracket bolt 41 4.1 29.5
Exhaust pipe nut 23 2.3 16.5
Muffler connection bolt 23 2.3 16.5
Muffler mounting bolt (Front side) 23 2.3 16.5
Muffler mounting bolt (Rear side) 44 4.4 32.0
To Next Page
Loading...
Need help?
General
