66
RECORDING
HOW TO RECORD
RECORDING
1. Prepare -
Prepare to record by setting the voice, style, tempo and reverb level and
other parameters as desired.
2. Select a track to record on-
Press the RECORD button.
It’s Indicator LED will blink.
NOTE: The first available melody track will also be automatically selected
and it’s corresponding LED Indicator will also blink.
The four LEDs of the Rhtyhm Beat Indicator (located to the left of the
Tempo Buttons) will blink with the current tempo, to show that the music
recorder is in standby mode.
3. Record -
Play the Piano. Recording will start as soon as you play on the piano,
depending on which track(s) has been selected.
4. Stop Recording -
Press the STOP button, the PLAY/PAUSE button or the REC button to
stop the recording process.
NOTE: When the record memory is full, recording will stop automati-
cally.
5. Erase a Track -
If you would like to erase a track-
Hold the RESET button down while you press the track button that you
would like to erase.
NOTE: If there is data in a track, its LED Indicator will also be lit.
The previously recorded music will playback, as a reference, while you
record the new track.
If you do not wish for previously recorded tracks to play while you are
recording, press the corresponding track button to turn the indicator light
off.
Rec
Record Accomp
1 : 3
/ = 100
Record Melody 3
The piano mode.
The top line displays which
melody track is recording.
The current bar (1) and
beat (3).
The current
tempo.
If the accompaniment track
is being recorded it will
shown here.
RECORD
STOPPLAY/PAUSE
RECORD
STOPPLAY/PAUSE
MEL. 2 MEL. 3 RESETMEL 1
To Next Page
Loading...
Need help?
General
