6
QUICK PLAY - SONG CARTRIDGE (optional)
1
PLAYING ALONG WITH THE SONG CARTRIDGES
The Q Chord has the ability to play prerecorded song cartridges
called “Q Cards.” To play one of these optional cartridges follow
the simple instructions shown below. For more advanced play see
the Song Cartridge section later in this manual.
Do not force the Q Card into its connection, it should insert
properly when firmly pressed. Make sure to insert the open end of
the cartridge, not the label end.
When the Song Cartridge is correctly inserted the display will read
“01.”
If you want to play a song other than the first selection press
the UP search button until you reach your desired song.
Remember if the card is not inserted properly then the Q Card
control LCD will not display any digits.
2
Press the Play button.
Make sure that the Master Volume Knob is set to the 2 o’clock
position or higher.
You should hear your selected song.
3
Strum or tap the Strumplate with your thumb or fingers.
Try taping your fingers to the beat of the music. Play around
using different finger and or thumb activity.
Q TIP: There are many different fun and exciting ways that you
can play with this prerecorded music. We will get into more detail
later in this manual.
Remember it’s that simple to play!
1. Plug in the song cartridge
2. Press Play
3. Strum Away!
4
Turn the power off.
Push the open end of the song cartridge into the Chord Button
end of the Q Chord, marked “Q Card”, as shown. Press in firmly
until the Cartridge is seated properly.
Make sure that the label side of the Cartridge is up so that you do
not force it in the wrong way.
2
3
To Next Page
Loading...
Need help?
General
