9
ASSEMBLY
B. Lift the packing box up and off the piano.
Tools needed:
• Flat Head Screw Driver
• Scissors or Sharp Knife
C1. With the packing box off, you will see the wrapped piano.
Additional boxes located under the keyboard contain the bench, music
rack and accessories.
C2. Remove the packaging so that the piano can be lifted off the
pallet.
1. UNP
ACKING YOUR NEW PIANO (BOX, PALLET)
A1. Cut and remove the shipping bands around the pallet and box.
Do not cut into the box.
A2. The packing box is attached to the pallet with fasteners. Slide a
flat head screw driver between the box and pallet. Gently separate the
box from the pallet by removing the fasteners.
IMPORTANT!
The fasteners must be removed to avoid scratching the piano when the
box is lifted up and off the piano.
To Next Page
Loading...
Need help?
General
