7-41
INSPECTION AND MAINTENANCE
#1: Valve clearance for K14C engine models is not required for maintenance.
#2: Be sure to perform the engine coolant level check under the daily inspection in “OPERATING YOUR VEHICLE” section.
If you use the engine coolant other than the SUZUKI LLC: Super (Blue) for replacement, follow the schedule of SUZUKI LLC: Stan-
dard (Green).
Interval: This interval should be judged by
odometer reading or months, whichever comes
first.
km (x1000) 7.5 15 22.5 30 37.5 45
miles (x1000) 4.5 9 13.5 18 22.5 27
months6 1218243036
ENGINE
*1-1. Engine accessory drive belt Tension check, *Adjustment, *Replacement – I – I – R
*1-2. Valve clearance [Class 1] (#1) – – – I – –
1-3. Engine oil and engine oil filter Replace every 5000 km (3000 miles) or 6 months.
*1-4. Fuel Injection [Class 2] – – – I – –
1-5. Engine coolant SUZUKI LLC: Super (Blue) (#2)
First time only: Replace at 150000 km (90000 miles) or 96 months.
Second time and after: Replace every 75000 km (45000 miles) or 48 months.
SUZUKI LLC: Standard (Green) –––––R
*1-6. Exhaust system (except catalyst) – – – I – –
IGNITION
2-1. Spark plugs [Class 1] (Standard type) Nickel plug Replace every 10000 km (6000 miles) or 8 months.
[Class 2] Iridium plug – – – R – –
FUEL
3-1. Air cleaner filter element*
1
Inspect every 2500 km (1500 miles).
Replace every 30000 km (18000 miles) or 24 months.
*3-2. Fuel lines ––– I ––
*3-3. Fuel filter On the way of the fuel line – – – – – R
*3-4. Fuel tank ––––– I
EMISSION CONTROL SYSTEM
*4-1. PCV valve ––––––
*4-2.
Fuel evaporative emission control system
– – – – – –
To Next Page
Loading...
Need help?
General
