41
9.5) TENSION CHECK OF EACH DRIVING BELT
When the belt tension is either too excessive or weak, it may cause abnormal abrasion around the moving parts
and the lower performance of the machine functions. Make sure to perform regular tension check.
Main Shaft Motor Belt
Every three months
Every three months
Every three months
Every three months
Every three months
Every three months
① Check the belt tension
② Check the belt ruptures
③ Check the degree of abrasion
④ Check the damage to the bearing
⑤ Check the degree of the abrasion
around the wet moving areas
①
1
No. DescriptionWhere to Check Frequency
Reference Figure
Upper, Lower Shaft Belt2
Index Belt3
Y-shaft Driving Belt4
X-shaft Timing Belt5
Y-shaft Timing Belt6
Make sure to turn off the power of the machine before checking driving belts.
CAUTION
The arrows indicate the direction for checking the tension.
CAUTION
To Next Page
Loading...
Need help?
General
