Swift Challenger 580 User Manual

31
Bulb Replacement
ROAD LIGHT BULB ACCESS
REAR LIGHT CLUSTERS
(CONTAINING INDICATOR, TAIL / STOP,
REVERSE AND FOG LAMPS):
• These multi-function lights are LED and have no
user serviceable parts inside.
• Replacement clusters can be tted in the
following way:
• Remove three screws visible around the
perimeter of the cluster
• Pull the cluster away from the rear panel of the
tourer, taking care to not put excessive strain on
the electrical connections behind the lamp
• Unplug the electrical connection from the rear
of the lamp, by releasing the tab and lifting the
connector upwards relative to the cluster
• Plug the connector back into the replacement
lamp, position the lamp into the recess and
replace the three xing screws.
FRONT LOW LEVEL MARKER / POSITION
LAMPS (CLEAR LENSE)
• These lamps are LED and have no user
serviceable parts inside.
• Replacements should be undertaken by
your dealer, as the lamps are sealed onto the
mounting panel.
HIGH LEVEL BRAKE LAMP
• This lamp is single piece and has no user
serviceable parts inside.
• Replacements should be undertaken by
your dealer, as the lamps are sealed onto the
mounting panel.
NUMBER PLATE LAMPS
• These lamps are single piece and have no user
serviceable parts inside.
• Replacements should be undertaken by
your dealer, as the lamps are sealed onto the
mounting panel.
SIDE MARKER / POSITION LAMPS
(AMBER LENSE)
• These lamps are LED and have no user
serviceable parts inside.
• Replacements should be undertaken by
your dealer, as the lamps are sealed onto the
mounting panel.
UPPER SIDE MARKER / POSITION LAMPS
(RED AND WHITE LENSE)
• These lamps are LED and have no user
serviceable parts inside.
• Replacement should be undertaken by your
dealer, as the lamp is sealed onto the mounting
panel.

Swift Challenger 580 Specifications

General

Brand	Swift
Model	Challenger 580
Category	Caravans
Language	English