Swift Edge 412 Standard User Manual

108
Bulb Replacement
ROAD LIGHT BULB ACCESS
REAR LIGHT CLUSTERS (CONTAINING
INDICATOR, TAIL / STOP, REVERSE AND FOG
LAMPS)
• These multi-function lights are LED and have no
user serviceable parts inside.
• Replacement clusters can be tted in the
following way:
• Remove three screws visible around the
perimeter of the cluster
• Pull the cluster away from the rear panel of the
tourer, taking care to not put excessive strain on
the electrical connections behind the lamp
• Unplug the electrical connection from the rear
of the lamp, by releasing the tab and lifting the
connector upwards relative to the cluster
• Plug the connector back into the replacement
lamp, position the lamp into the recess and
replace the three xing screws.
NUMBER PLATE LAMPS, LED
• These lamps are LED and have no user
serviceable parts inside.
• Replacements should be undertaken by
your dealer, as the lamps are sealed onto the
mounting panel.
HIGH LEVEL BRAKE LAMP
• These lamps are LED and have no user
serviceable parts inside.
• Replacements should be undertaken by
your dealer, as the lamps are sealed onto the
mounting panel.
FRONT AND REAR UPPER MARKER / POSITION
LAMPS
• These lamps are LED and have no user
serviceable parts inside.
• Replacements should be undertaken by
your dealer, as the lamps are sealed onto the
mounting panel.
SIDE MARKER / POSITION LAMPS
• These lamps are LED and have no user
serviceable parts inside.
• Replacements should be undertaken by
your dealer, as the lamps are sealed onto the
mounting panel.

Swift Edge 412 Standard Specifications

General

Brand	Swift
Model	Edge 412 Standard
Category	Motorhomes
Language	English