The command panel powers the Motorhome, on entering the Motorhome push the main
button, the LED panel will light up the Touch Screen.
The Water Pump is the Tap sign on the panel. Press this it will turn Blue and you will hear the
pump running. The pump is required for running the water and the shower.
Control the lights dim or bright
The water Icon Controls the water settings
Check the water levels and empty the
Waste when full
Choose empty waste, tap confirm this will
open the valve Automatically when the
tank is empty a yellow circle will flash, tap
the empty waste again and confirm stop
emptying waste, this will close the valve
THE COMMAND PANEL ALLOWS YOU TO CONTROL THE FOLLOWING:
To Next Page
Loading...
Need help?
General
