Wichtige Hinweise
49
7. Troubleshooting
49
Error
Troubleshooting Solution
No power assist when driving
the scooter
Not switched on 1. Check if the battery is connected correctly.
2. Check if the battery needs to be charged
Range too low 1. The battery is not fully charged
2. The tires have too little air.
3. Frequent brakes / starts /
Overload trips
4. The battery is too old or has reached the maxi-
mum charge cycles.
5. low temperature, battery
damping
1. Check if the charger is working.
2. Check the tire pressure
3. Drive properly
4. Replace the battery
5. normal perspiration
The battery can not be charged 1. The charger is not connected
2. Battery temperature is too low
3. Battery temperature is too high
1. Check if the cable is connected
2 / 3. Wait until the temperature returns to normal
The dispay does not work 1. Is not switched on
2. Adapter defective
3. Meter faulty
Check battery condition
2./3. Contact the customer service
The engine does not run when
switched on
1. The brake is engaged / activated
2. Meter faulty
1. Check the brake
2. Contact the customer service for replacement
To Next Page
Loading...
Need help?
General
