2. MAINTENANCE INFORMATION SYM
2-12
ADDED BRAKE FLUID
Add brake fluid to UPPER limit lever.
Recommended brake fluid: DOT3 or DOT4
WELL RUN brake fluid.
Caution
BRAKE LINING WEAR
The indent mark on brake lining is the wear
limitation.
Replace the brake lining if the wear limit
mark closed to the edge of brake disc.
Caution
Remove the brake clipper bolt, and take out
the clipper.
Caution
Pry out the brake lining with a flat driver if
lining be clipped.
Remove brake lining bolt.
Take out the lining.
Caution
Never mix or use dirty brake fluid to prevent
from damage brake system or reducing
brake performance.
It is not necessary to remove brake hose
when replacing the brake lining.
Do not operate the brake lever after the
clipper removed to avoid clipping the brake
lining.
In order to maintain brake power balance,
the brake lining must be replaced with one
set.
Brake ling wear limit
Brake clipper
Brake disc
Brake
clipper bolt
Bolt
Brake lining
Brake fluid cap
Low limit
To Next Page
Loading...
Need help?
General
