SystemAir K 100 M User Manual

1 Introduction
1.1 Product description
This product is a circular duct fan with an airtight casing
made from sheet metal.
The product is not supplied with a safety switch, external
speed control, or FK fast clamps, these parts are available
and recommended as accessories.
1.2 Intended use
The product is used for transportation of clean or contami-
nated air with a maximum temperature of 70 °C and 95% air
humidity.
The product is intended for installation in indoor environ-
ments and wet rooms. It is also possible to install the product
in outdoor environments with weather protection. The prod-
uct is applicable for ambient temperatures of between -25 °
C and +70 °C.
K fans, KV fans and prio fans are made for installation in cir-
cular duct systems.
The product is not applicable for transportation of air that
contains explosive, flammable or aggressive media. The
product is not applicable for locations where there is a risk of
explosion.
1.3 Document description
This document contains instructions for installation, operation
and maintenance of the product. The procedures must be
done by approved personnel only.
Speak to Systemair for more information on how to install the
product in different installation locations.
1.4 Product overview K fan and KV fan
2
3
4
5
6
1
7
1. Fan impeller
2. Connection box
3. Name plate
4. Casing
5. Mounting bracket (for K fans)
6. Self-drilling screws
7. Wall mounting plate (for KV fans)
1

SystemAir K 100 M Specifications

General

Brand	SystemAir
Model	K 100 M
Category	Fan
Language	English