_____________________________________________________________________________________________________
Topvex TR03, TR04, TR06 Installation description
205354 Systemair AB
11
Manufacturer
Our products are manufactured in compliance with
applicable international standards and regulations.
Systemair AB
Industrivägen 3
SE-739 30
Skinnskatteberg
SWEDEN
Office: +46 222 440 00
Fax: +46 222 440 99
The manufacturer hereby confirms that the
following products:
Air handling units
Topvex TR03 HW, Topvex TR03 EL
Topvex TR04 HW, Topvex TR04 EL
Topvex TR06 HW, Topvex TR06 EL
Comply with the following EC-directives:
EC Declaration of Conformity
as defined by the EC Machinery Directive
98/37/EC, Annex II A. Fans for ventilation in air
handling systems with air from non-explosion
hazardous premises. This machinery must not be
put into operation until prior to reading mounting
instruction and safety information.
The following harmonized standards are in
use:
EN 60 034-1 Rotating electric machinery; ratings
and performances.
EN ISO12100-1
Safety of machinery – Basic concepts, general
principles for design
EN 292-1
Safety of machinery; basic concepts, general
principles for design.
EN 294
Safety of machinery; safety distances to prevent
danger zones reached by the upper limbs.
Remark: EN 294 only complies when fitted contact
safety device is part of the extent of delivery.
EC Declaration of Conformity
As defined by the EC Low Voltage Directive
2006/95/EG
The following harmonized standards are in use
:
EN 60 335-1
Electric domestic products and similar – safety-
general requirements.
EN 60 335-2-40
Safety of household and similar electrical
appliances - Part 2-40: Particular requirements for
electrical heat pumps, air-conditioners and
dehumidifiers.
EN 50 106 Electric domestic products and similar-
Safety-Description for control of manufacture.
Remark: EN 50 106 complies for internally wired
products only.
EC Declaration of Conformity
As defined by EC’s EMC-directive 2004/108/EG
The following harmonized standards are in use:
EN 61000-6-4: Electromagnetic compatibility (EMC)
- Part 6-4: Generic standards - Emission standard
for industrial environments.
EN 61000-6-2 Electromagnetic compatibility (EMC)
– Part 6-2: General requirements – Immunity for
appliances in industrial environments.
The complete technical documentation is available.
Skinnskatteberg, 07-10- 2010
Mats Sándor
Technical Manager
To Next Page
Loading...
Need help?
General
