Tait TM9480 Quick Start Guide

P25 Trunking Setup Quick Start Guide Talkgroup List 4
© Tait International Limited May 2021
4 Talkgroup List
To configure a talkgroup list for your radio, you must input each of your
required talkgroups into the Talkgroup Members table of the P25 Terminals
Programming Application (P25 Digital > Talkgroup Lists).
With each talkgroup, include its decimal or hexadecimal ID, label, the
encryption key (if required), and the failsoft channel.
For systems that use infrastructure failsoft, check the infrastructure
failsoft tick-box (under Talkgroup Lists above the table). For each
talkgroup, enter the frequency of the failsoft channel. Leave the value
blank, and the radio will hunt for a failsoft channel and configure the
frequency, forcing the radio to go to a specific channel.

Tait TM9480 Specifications

General

Brand	Tait
Model	TM9480
Category	Two-Way Radio
Language	English