8
Recommended chemicals
Please only use the recommended TASKI chemical products
The correct dosage is recommended on the product's packaging and on the "TASKI
Product Information Sheet".
Application technique
Beginning work
Begin cleaning operation
Caution:
Using other chemicals (e.g. chemicals containing solvents, chlorine,
hydrochloric acid and hydrofluoric acid) can damage or destroy the
machine.
When using the ergodisc 1200, work with lanes.
When using the spray unit, briefly press the push button of the electrical spray
unit every 3 steps!
t Drive over the same lane again without spraying the
product onto the floor (polish)
t then return to the starting position and repeat the
procedure.
Mount a dry / clean pad after approx. 50 -100m
2
and polish the surface.
Use less of the product for small stains, by doing so a second working cycle
(polish) is often not needed.
Caution:
For beginners, we recommend to practise the leading of the machine
(handling) on a flat surface and in a wide open area, until the machine is
managable.
To Next Page
Loading...
Need help?
General
