To Next PageTo Next Page
Need help?Do you have a question about the tau K122M and is the answer not in the manual?
General| Brand | tau |
|---|---|
| Model | K122M |
| Category | Control Panel |
| Language | English |
Provides the overall installation guide for the K122M control panel and SPEED2Q gearmotor.
Detailed wiring schematic for the K122M control board and its connections.
Further schematic showing connections for photocells, stop buttons, and lights.
Details the optional battery charger board, including fuses and LED indicators.
States compliance with EEC directives and identifies applicable standards for the product.
Crucial safety warnings and important information before starting installation.
Steps and precautions for correct and expert installation of the equipment.
Lists key features like microprocessor, LEDs, functions, and technical specifications.
Details the function and description for each terminal connection on the board.
Step-by-step guide for memorizing gate travel limits and settings.
Explains adjustments for slowdown distance, automatic closing time, and sensitivity.
Details the function of each dip switch for controlling operational logic and features.
Describes the meaning of LED states and pre-defined flash patterns for error signaling.
Explains the function and signals of the gate open warning light.
Details how the optional battery charger board functions during power failures.
Covers obstacle detection behavior and setting the slow-down function for gate travel.
Explains timer-controlled cycles and the procedure for gate realignment.
Lists diagnostic LEDs and provides solutions for common malfunctions and causes.
