6
Introduction
Remote Control Functions
Most of your television's functions are available via the menus that appear on the
screen. The remote control supplied with your set can be used to navigate through
the menus and to configure all the general settings.
Source Press to select signal source.
(On/Off button) Turns the TV on or off.
0-9 (numeric buttons) Enters channel numbers.
Exit Exits the menu system.
Return
Return you to the previous channel in TV mode.
Info
Display the status information.
(up, down, left and right direction buttons) Highlights different items
in the menu system and adjusts the menu controls.
OK
Confirm your selection.
(MUTE) Reduce the TV's volume to its minimum level. Press again
to restore the volume.
Menu Bring up the menu system.
VOL +/- Increase or decreases the TV's volume.
CH +/- Scan up or down through the current channel list.
TV In DTV mode, presses to switch DTV and RADIO.
In the other sources, presses to back DTV.
Option
Enters the record function.
Note: the speed will be slow by using U disk, it is better to use
hard disk .
Zoom +/-
Guide
ECO
Red button
Yellow button
Blue button
Green button
In corresponding mode, press it to enter the right function as hint.
In corresponding mode, press it to enter the right function as hint.
Mute
Text
Subtitle
List
Display the information of digital program.
(Only available in digital mode)
Press to select the desired screen format.
(In USB mode, it is un .)available
Teletext
Press to select the Channel List.
Press to enter saving energy mode.
Press to display the Subtitle Language menu.
In corresponding mode, press it to enter the right function as hint.
In corresponding mode, press it to enter the right function as hint.
(In USB mode, press to select sound track mode )
To Next Page
Loading...
Need help?
General
