12
Using More of Your TV
Using Instant Power On
It enables you to turn on your TV faster from standby
increase standby power consumption .
1. Press
on the remote control to display the
homepage,
Press to select
>
Device > Power > Instant power on and press
OK to toggle between On and .
2. Press
to return to the homepage.
T-Link
Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable auto power
on and auto standby between the TV and CEC devices.
Enabling or Disabling T-Link
1. Press
on the remote control, select System >
T-Link and press to enter.
2. Press / to select T-Link and press to
enter.
3. Press / to select On or and press OK to
4. Press EXIT or
to close the menu.
Using Auto Power On
Enables the TV to automatically power on when you
power on a CEC device (e.g. DVD) with the device’s
remote. Select On to enable this function.
Using Auto Standby
Enables all CEC devices to automatically go to the
remote. Select On to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some
devices may not interoperate correctly when
connected to this TV. The user manual or
the manufacturer of the problematic devices
should be consulted for further information.
Using EPG (Electronic Program Guide)
EPG is an on-screen guide that displays scheduled
digital TV programs. You can navigate, select and view
programs.
1. Press GUIDE on the remote control, the Program
Guide menu will appear, which allows you to get
information about the current or next program
playing on each channel. Navigate through the
the remote control.
2. Use the related buttons shown at the bottom of the
screen to view EPG.
Selecting a Subtitle Type on Digital TV
Channels
1. Press
on the remote control, select Channel >
Subtitle > Subtitle type and press to enter.
2.
Hearing impaired to display
the hearing impaired subtitles with your selected
language.
3. Press EXIT or
to close the menu.
Using Teletext
Selecting Decoding Page Language
1. Press on the remote control, select Channel >
Teletext > Decoding page language and press
to enter.
2. Press / to select a proper type of language in
which Teletext will display and press OK
3. Press EXIT or
to close the menu.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
allows you to select an available language as primary
pages.
1. Press
on the remote control, select Channel >
Teletext > Digital teletext language and press
to enter.
2. Press / to select a language and press OK to
3. Press EXIT or
to close the menu.
Network Wake Up
This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure:
1. Your TV is connected to an effective home network;
2. The desired controller, such as a smartphone, is
connected to the same network as your TV;
3. An App which supports network waking up function,
has been installed into the controller;
4. Networked standby is set to On in the Network
menu under homepage by pressing
>
(Settings) > Network.
When the TV is in networked standby mode, you can
use the App to wake up the TV remotely.
To Next Page
Loading...
Need help?
General
