TCL 43C735 User Manual

EN
14
English
Using more of your TV
When the TV is in networked standby mode, you can
use the App to wake up the TV remotely.
Notes:
-
This feature is disabled if you press and hold the
button on the remote control and conrm to
shut the TV down.
-
Before using the feature of networked waking up,
make sure the
Quick start
function is enabled.
-
This function may not be available for certain
models.
-
This feature is only available in Google TV mode.
Reset to factory default settings
Allows you to reset the TV to factory default settings.
1.
Press on the remote control, select
Settings
> System > About > Reset > Factory reset >
Delete everything
and press
OK
to conrm.
2.
Use the numeric buttons on the remote control to
enter the password 1234 or your own password in
case you have changed it.
3.
Select
OK
and press
OK
to conrm.
4.
The
Welcome
screen appears. Follow the
instructions in the section
Initial setup
.
Using the hands-free TV voice control
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access
the Google website rst. Then follow the steps below
to access.
1.
Turn the built-in MIC switch (Please refer to the
Quick Start Guide to nd the MIC switch on your
TV set) to on before using this function.
2.
Press on the remote control and follow the on-
screen guide to nish pairing the remote control
with the TV.
3.
Select "Yes, I'm in".
4.
Say "OK Google" or "Hey Google" to activate it.
Notes:
-
This hands-free TV voice control is only available
for selected models. For details, please refer to
your local dealer.
-
A quiet surrounding is required for better function
when using it. The recommended distance for
using the hands-free TV voice control is within 2
meters in front of it.
-
Turn the built-in MIC switch to o if you are not
going to use it.
-
The availability of hands-free TV voice control
depends on your region/country/language.
-
Turn on both
Quick start
and
Screenless
service
in the
Settings > System > Power and
energy
menu to enjoy hands-free voice control
in TV standby mode.
-
Standby power consumption will increase
because the built-in MIC is always listening
when the Google Assistant or voice control with
the built-in MIC is enabled.
-
This feature is only available in Google TV
mode.
15 / 18 14 / 16 15 / 18

TCL 43C735 Specifications

General

Power consumption (max)	100 W
Power consumption (standby)	0.29 W
Power consumption (typical)	65 W
Control type	Wireless
Auto power off	Yes
Screen shape	Flat
Response time	- ms
Display diagonal	43 \
Display brightness	- cd/m²
Display technology	QLED
Native aspect ratio	16:9
Native refresh rate	60 Hz
Peak luminance ratio	65 %
Motion interpolation technology	-
Wi-Fi standards	802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
PC in (D-Sub)	No
Ethernet LAN (RJ-45) ports	1
Common interface Plus (CI+) version	1.4
Processor cores	4
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG)
Manual languages	BUL, CZE, DEU, ENG, ESP, EST, FIN, FRE, LAV, LIT, POL, POR, RUS, SER, SLK, SLV, SWE, TUR, UKR
Remote control type	RC902V1+RC802NU1
Hybrid Broadcast Broadband TV (HbbTV) version	2.0.2
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-C, DVB-S2, DVB-T2
Audio decoders	Dolby Atmos, Dolby Digital AC4, Dolby TrueHD
RMS rated power	10 W
Product color	Black
Panel mounting interface	200 x 200 mm

Weight and Dimensions

Depth (with stand)	256 mm
Width (with stand)	958 mm
Height (with stand)	617 mm
Weight (with stand)	8100 g
Depth (without stand)	82 mm
Height (without stand)	562 mm