B
– Align the stands with the screw holes located on the TV stand column:
Connecting an antenna, cable, or satellite box
If you are using an antenna, CATV cable without a set-top box, or a cable or
satellite box that has only an antenna output, connect a 75-ohm coaxial
cable (not provided) from the device to the ANT/CABLE input on the TV.
Tip:
If you are using an antenna with a 300 ohm twin-lead cable, you need to
use a 300-to-75 ohm adapter (not provided) to adapt the twin-lead cable to
a connection that is compatible with the TV’s antenna input.
Tip:
If you receive your TV stations through a set top box from a cable or
satellite TV provider, connect it to the TV using the best connection method
available. From most to least desirable:
• HDMI
®
input – Digital HD and SD video
• AV input – analog SD video
• Antenna input – analog SD video using NTSC
To Next Page
Loading...
Need help?
General
