Using your TCL • Roku TV
This section provides information on using the day-to-day features of your TCL • Roku TV.
TCL • Roku TV status light
Your TV has a single status light on the front panel. It goes on and off and blinks in different ways
depending on the status of the TV, as shown in the following table:
Screen is communicating that TV is on.
Screensaver (screen is active)
Screen is communicating that TV is on.
TV has power and is ready to use.
Starting up from off state
Slow pulsing blink until startup
completes
On (receiving update from USB)
Slow pulsing blink until update
completes
Remote control command received
TV has received your command.
Powering down to standby mode
Slow pulsing blink until the TV
reaches standby.
TCL • Roku TV joystick
The controls on the TV enable you to perform simple functions, but are not a substitute for the remote
control.
The joystick-type control on the back of the TCL • Roku TV near the lower right side
provides the following functions:
Press in to toggle between power ON and Standby.
Press up or down to increase/decrease the volume.
To Next Page
Loading...
Need help?
General
