Scanning for Antenna TV channels again
There will be times when you need to create a new channel list. For example, you:
• Change cable providers
• Reorient your TV antenna
• Move to a different city with different channels
Whenever you need to update your TV channel list, you can repeat the channel scan.
Tip:
Repeat the channel scan from time to time to make sure you are receiving the
latest channels. Broadcasters add and remove channels, move channels to different
parts of the spectrum, and change the power levels of their channels periodically.
Note:
Repeating the tuner channel scan unhides all hidden channels.
To repeat the channel scan, from the Home screen menu, navigate to Settings > TV
inputs > Antenna TV > Scan again for channels. Then select Start finding channels to begin
the channel scan process. The screens and options that appear during this process
are identical to those described in How do I set up the TV tuner?
Setting the HDMI
®
mode (4K models only)
On 4K (UHD) TVs, you can independently configure each HDMI
®
input to match the
capabilities of the connected device. From the Home screen menu, navigate to
To Next Page
Loading...
Need help?
General
