16
Adjusting your TV
Channels & Inputs
The channels and inputs menus are used to scan and maintain your channels, and access the
Electronic Program Guide. Adjust the input settings. The menus are only available in TV mode.
1. In TV mode, press
on the remote control, select Settings and go to Channels & Inputs.
2. Press the Up/Down button to select the item you want to set, and then press OK.
3. Set the channel and input items to your preferences one by one.
Channels
• Channel Scan: Search channels automatically or manually.
Country/Region: The TV installs and arranges channels according to your country or region.
Press the Up/Down button to select Country/Region, and press OK to enter. Create or enter
your password. Press the Up/Down button to select your country or region and press OK
to confirm.
Scan Automatically: Press the Up/Down button to select Scan Automatically and press OK
to enter. Select the tuner mode and channel type you wanted, then press the Down button to
select Search and press OK to start scanning channels.
Manually Scan: Scan channels manually by entering parameters such as channel number
or frequency.
• Edit Channels: After the automatic search, channels are arranged in a preset order. If you want to
edit the channel list, select Edit Channels and press OK to enter.
• Clear Channel List: Reset all channel lists.
• EPG: Access electronic program guide.
• Channel Diagnostics: Test your TV's picture, sound and signal.
Inputs
You can see the connected input, standby inputs and set the name of these inputs and select
whether to display them in the input list.
• External devices control (CEC): Control the devices connected by HDMI.
To Next Page
Loading...
Need help?
General
