12
Chapter 4 Using more of your TV
Enabling Subtitle Languages on Digital TV Channels
1. Press on the remote control, select (Settings) >
Channels & Inputs >
Channels > Subtitle > Digital
Subtitle Language 1st and press OK to enter.
2. Press Up/Down to select a subtitle language as your
preferred language and press OK to confirm.
3. Press Up/Down to select Digital Subtitle Language
2nd and press OK to enter.
4. Press Up/Down to select a secondary subtitle
language and press OK to confirm.
5. Press to return to the previous menu.
Selecting a Subtitle Type on Digital TV Channels
1. Press on the remote control, select (Settings)
> Channels & Inputs > Channels > Subtitle >
Subtitle Type and press OK to enter.
2. Press Up/Down to select a subtitle type and press
OK to confirm. You can select Hearing Impaired
to display the hearing impaired subtitles with your
selected language.
3. Press to return to the previous menu.
Using Teletext
Selecting Decoding Page Language
1. Press on the remote control, select (Settings)
> Channels & Inputs > C
hannels > Teletext >
Decoding Page Language and press OK to enter.
2. Press Up/Down to select a proper type of language
in which Teletext will display and press OK to
confirm.
3. Press to return to the previous menu.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language, which relates to different initial Teletext
pages.
1. Press on the remote control, select (Settings) >
Channels & Inputs >
Channels > Teletext > Digital
Teletext Language and press OK to enter.
2. Press Up/Down to select a language and press OK
to confirm.
3. Press to return to the previous menu.
Consumer Electronic Control (CEC)
Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable auto power
on and auto standby between the TV and CEC devices.
Enabling or Disabling CEC
1. Press on the remote control, select (Settings)
> Channels & Inputs > Inputs
> Consumer
Electronic Control (CEC) and press OK to enter.
Installing Channels
This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
- you are prompted that there are no channels in TV
mode;
- you want to update your channels.
1. In TV mode, press
on the remote control and
select
(Settings) > Channels & Inputs >
Channels > Channel Scan. Press OK to enter.
2. The TV installs and arranges channels according
to your country or region. Press Up/Down to select
Country/Region, and press OK to enter. Enter
the default password 1234 or your own password
in case you have changed the password in the
System > Parental Controls menu. Press Up/
Down to select your country or region and press OK
to confirm.
3. Press Up/Down to select Scan Automatically and
press OK to enter.
4. Press Up/Down to select Channel Type and
press Left/Right to select Digital, Analog or
Digital&Analog.
5. After configuration is completed, press Down to
select Search and press OK to start scanning
channels.
6. The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or move channels,
press
on the remote control, select (Settings)
> Channels & Inputs > Channels > Channel
Organizer and press OK to enter.
Note:
If the channel search retrieved only the analogue
channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty.
Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T digital broadcasts.
With digital broadcasts, you have the additional option
of selecting a preferred subtitle language.
Note: Some options are available only when Subtitle is
set to on.
Turning On/Off Subtitles
1. Press on the remote control, select (Settings)
> Channels & Inputs >
Channels > Subtitle and
press OK to enter.
2. Select the Subtitle option and press OK to toggle
between on and off.
3. Press to return to the previous menu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
