4
Mark on the wall using each marking on the template
through the mounting holes.
5
Take away the wall mount template.
6
Drill a screw hole at each marking on the wall.
7
Screw off the rubber cushions from the soundbar.
(Reserve the rubber cushions for future use)
8
Screw on the wall mount brackets to the soundbar.
9
Insert the supplied screws with the sleeves into the
hole of the wall anchors.
* The rubber cushions can be used as soundbar mats
when you put the soundbar on the table
11
> 5cm
TV
TV
780mm
1
3
4
5
2
6
To Next Page
Loading...
Need help?
General
