12
Switch the TV on and off
1. When the power cord is connected, the TV will be turned on directly or be in standby mode. If
the TV is in standby mode, press the button on the set or the button on the remote control
to turn it on.
2. To put the TV into standby mode, press the
button on the remote control. The TV set remains
powered on, but with low energy consumption.
3. To completely turn the TV off, unplug the power cord from the wall outlet.
Initial setup
The first time you switch the TV on, the Welcome screen appears, which guides you through the
initial setup process. Follow the on-screen instructions to finish the initial setup process including
selecting the language, connecting to the network, and more. During each step, either make a
choice or skip the step. If you skip a step, you can perform the setup later from the settings menu.
To Next Page
Loading...
Need help?
General
