Page 8 of 18
OPERATION AND SETTINGS
This portable air conditioner boasts three functions: cooling, dehumidifying and fan.
The fan has three speeds: high, medium and low
The desired temperature can be set between the range of 18-32
0
C for cooling mode.
The unit will also display operating function, temperature, fault diagnostic and protective
functions on the LED screen.
CONTROL INSTRUCTIONS
When first plugged in the unit will automatically enter standby mode. The control panel on
the top of the appliance enables basic control of the air conditioner. For access to all the
features the remote should be used.
CONTROL PANEL
CONTROL PANEL FUNCTIONS
ON/OFF BUTTON
Press this button to turn the unit on and enter the last function that was running before the
unit was turned off. Press again and the unit will switch off.
MODE BUTTON
Press this button to choose Cooling, Dehumidifying or Fan mode. The corresponding light
on the display panel will illuminate to show which mode is currently set. Due to
compressor protection it may take 3 minutes for the compressor to start after choosing the
dry or cooling modes.
To Next Page
Loading...
Need help?
General
