TCL Alto 5 User Manual

26
Connect the IR pass-through cable
If the Sound Bar blocks the IR receiver of the TV when
placing directly in front of it, you can connect the Sound Bar
and TV with the supplied IR pass-through cable so that it
can receive signal from the remote control of your TV.
Connect one end of the IR pass-through cable to the IR
pass-through cable connector on your Sound Bar main unit.
Then, place another end with the IR blaster close to the TV
sensor. For information, check the user manual of your TV.
TV Sensor
IR

TCL Alto 5 Specifications

General

Brand	TCL
Model	Alto 5
Category	Speaker System
Language	English