TCL C2 series User Manual

6
Introduction
Open
Close
Exclusive Remote Control
To switch the sound off and back on.
Standby / quit standby.
/ To control the volume.
To access or exit T-Launcher.
To turn on the mouse function.
* To display the Settings menu.
P / To change channels.
To access or exit the Smart TV homepage.
To select input source.
/ / / Navigation direction buttons.
OK Toconrmanentryorselection.
To return to the previous menu or quit an App.
To display the Option menu.
ToaccessNetix.
To pop up the virtual remote control keyboard when available.
* or
To turn on the voice function. (Available only when the
network connection is normal.)
Note: This remote control is available only for selected models. The remote
control type may be changed without notice.
How to use the remote control
When using or or buttonforthersttime,youwillbe
prompted to pair the remote with the TV. Please follow the
on-screen guide for paring instructions.
a.Keep the remote control and TV in 1 meter, press OK and
button on the remote at the same time. You can use
or or button after activating successfully.
b.This voice search function or is only available for
content search from certain apps.
c.Set languages in the TV settings to your local language or
ofciallanguagetoenhancevoicesearchsuccessfully.
Installing batteries
1. Hold the bottom part of the remote control, use a plastic
coin-shaped object to twist the switch to the “Open”
location as illustrated.
2. Pull out the battery cover.
3. Insert two AAA batteries according to the polarities marked
on the battery case.
4. Replace the battery cover and use a plastic coin-shaped
object to twist the switch to the “Close” location.
or

TCL C2 series Specifications

General

Brand	TCL
Model	C2 series
Category	LED TV
Language	English