8
Call control
Call control Operation
Mute/unmute the
microphone during a call
Press twice.
No mute function when 2nd
caller actived
Pick up or hang up a call Press once
Switch to another caller
during a call
Press twice
Reject an incoming call Press and hold for
2seconds
Adjust the volume Press or
00:02
X 2
X 2
Switch the voice language
After powering on the headphones, you will hear voice
notifications of different headphone status such as when the
battery level is low or when the headphones are connected
to the smartphone or Bluetooth
®
device. To switch to
another voice language, see the following steps.
1 Make sure the headphones are powered on.
2 Press and hold and simultaneously for
5seconds.
You will hear a sound signal to confirm that the voice
language has been changed.
A
中
Tip
• There are two voice languages (English and Mandarin
Chinese) available for selection.
To Next Page
Loading...
Need help?
General
