21
Expert Settings
Setup
Parental Control
Language
Sound
Picture
USB
Exit
Backlight
Color
50
50
Color Temperature
0
Tint
0
Back
MENU
Adjust Select Exit
CLEAR
Color - Adjusts the richness of the color.
Tint - This option adjusts the balance between the red
and green levels.
Color Temperature - Adjusts the color temperature from
cool to warm.
Note: Color and Tint are not available in PC mode.
Advanced Settings
Light Sensor – When activated, this feature monitors
the ambient light conditions in the room and adjusts the
79¶VEDFNOLJKWIRURSWLPXPYLHZLQJ,WDOVRVHUYHVDVDQ
HQHUJ\VDYLQJIHDWXUHE\ORZHULQJWKHEDFNOLJKWSRZHU
OHYHOZKHQDSSURSULDWHW\SLFDOO\LQGDUNHUFRQGLWLRQV
Dynamic Backlight – This option automatically adjusts
WKHEULJKWQHVVRIWKHEDFNOLJKWDFFRUGLQJWRWKHFRQWHQW
of the incoming signal. Dynamic Backlight optimizes
the picture quality and decreases power consumption.
Noise Reduction – This setting reduces picture “static”
or any type of interference. This feature is especially
XVHIXOIRUSURYLGLQJDFOHDUHUSLFWXUHLQZHDNDQDORJ
signal conditions. Choose between these options:
Low for a softer, smoother picture that retains picture
sharpness and detail.
Middle for a slightly softer picture than the Low
setting.
High for an even softer, smoother picture than
the other settings (the picture detail is somewhat
decreased).
SABC (Scene Adaptive Brightness Control) –
Option: On/Off. If set to On mode, distribution of
EULJKWQHVVHYHU\VFHQHLVSLFNHGRXWDXWRPDWLFDOO\79
always adjusts appropriate brightness by full automation.
PC Settings
- This option allows you to adjust the PC
settings when in PC mode.
Reset Picture Settings
- This function allows you to
reset all the picture settings to the factory default settings.
Advanced Settings
Setup
Parental Control
Language
Sound
Picture
USB
Exit
Light Sensor
Dynamic Backlight
Off
Off
Off
Nosie Reduction
Auto
SABC
Back
MENU
Adjust Select Exit
CLEAR
To Next Page
Loading...
Need help?
General
