9
General Operation
Sorting channels swaps two channelsā position
1. Select the Channel sort option and press the OK or
right direction button to display Channel sort menu
2. press the up or down direction button to select a
channel, and press OK to confirm
3. Press the up or down direction button to select your
swapped channel, and press OK to swap the two
channels.
Edit channels: Select the Channel edit option and
press the OK or right direction button to display
Channel edit menu Press the OK button to enter
Then press the number button to edit the channel
When you have finished press Menu to return or press
Exit to close the menu
Automatic Update
This allows you to update all available channels without
altering the sorting of existing channels
1. Display the Channel install menu, press the up or
down direction button to highlight Automatic update
option.
2. Press the OK or right direction button to start to update
the channels. To stop the update process, press the
Menu button.
3. When the search is completed, press Menu to return,
or press OK to restart.
Digital Test Reception
If using digital broadcasts, you can check the signal quality
of digital channels. This allows you to reposition the
antenna for the best reception
Display the Channel install menu press the up or down
direction button to highlight Digital Test reception then
press the OK or right direction button to enter it
1. Use digit keys to manually enter the frequency of the
channel you want to test, then press the OK button to
start the test from the current frequency.
2. If the signal quality is good, press the OK button to store.
If it is poor, please check the frequency, antenna
connection and position, and retest again.
3. Press Menu to return to the previous menu or press
Exit to close the menu.
Analog Manual Installation
1. Display the Channel install menu, press the up or down
direction button to highlight Analog manual installation,
press the OK or right direction button to enter.
2. Press the up/down/left/right direction and number or OK
button to search, fine tune or store the channel.
3. Press Menu to return to the previous menu or press
Exit to close the menu.