9
Switch the voice language
After powering on the earphones, you will hear voice
notifications of different earphone status such as when the
battery level is low or when the earphones are connected to
the smartphone or Bluetooth device. To switch to another
voice language, see the following steps.
1 Place both earphones in the charging case.
2 Press and hold the multi-function buttons on both
earphones simultaneously for 4 seconds and release
both buttons.
You will hear a sound signal to confirm that the voice
language has been changed.
3 Press and hold both multi-function buttons for 8
seconds to manually turn off the earphones.
You will hear a voice notification and the LED
indicators will light up for about 1.5 seconds.
4 Press and hold both multi-function buttons for
10 seconds until the LED indicators light up for about
2 seconds.
Both LED indicators will flash two colours alternately.
You will hear a voice notification.
5 Press the multi-function button of the right earphone twice.
The left and right earphones will connect together.
The LED indicator on the left earphone will turn off.
You will hear a voice notification on the right earphone.
The LED indicator on the right earphone will flash two
colours alternately. The earphone is in pairing mode.
6 You can now connect the earphones to your device or
put the earphones back to the charging case to turn
them off.
Reset the earphones
If you have to reset your earphones due to the connection or
pairing issues, see the following steps.
1 Remove 'TCL SOCL500TWS' from the Bluetooth list of
your smartphone.
2 Remove both earphones from the charging case.
Tip
• There are two voice languages (English and Mandarin
Chinese) available for selection.
00:04
TCL SOCL500TWS
×
L
00:08
R
L
00:10
R
R
X 2
To Next Page
Loading...
Need help?
General
