Power cool function
In the unlocked state, press the "Temperature control switch" key repeatedly until the "Power cool" icon flashes, stop
the key operation and wait for 5 seconds, then the power cool function of the refrigerating chamber will start. The
corresponding temperature in the power cool state will be 2℃.
Smart function
In the unlocked state, press the "Temperature control switch" key repeatedly until the "Smart" icon flashes, stop the
key operation and wait for 5 seconds, then the smart function will start. The corresponding temperature in the smart
state will be 5℃.
Energy saving function
In the unlocked state, press the "Temperature control switch" key repeatedly until the "Energy saving" icon flashes,
stop the key operation and wait for 5 seconds, then the energy saving function will start. The corresponding
temperature inside the refrigerating chamber in the energy saving state will be 6℃.
Door alarm
If the refrigerating chamber is not closed tightly or it keeps open for more than 1 minute, the "Door alarm" icon will
flash to remind, and at the same time it will beep. Any key can be pressed to temporarily stop the alarm, but it will
alarm again 1 minute later. Close the refrigerating door tightly to stop the flashing and alarm.
To Next Page
Loading...
Need help?
General
